Z3x Easy Jtag Plus tool is an EMMC repair tool from Z3x that helps you to flash firmware, upgrade software, remove screen lock, Bypass FRP lock, read emmc storage, and more to fix any UFS & EMMC-powered smartphone & tablets.
Here, I will share with you all about the latest features. and the benefit of using it and how you can properly install it without facing any errors. So, let’s get straight into the main article.
Read: Download MDM Fix Tool
Read: EFT Pro Dongle Latest Setup
What is Z3x Easy Jtag Tool?
The Z3x easy JTAG tool is an EMMC, UFS memory flashing and repairing tool that helps you to flash and write factory images, reset Oppo Lock, wipe user data, read, write, and erase UFS and EMMC cards.
The Z3x Easy Jtag setup installation process is too easy. Just follow the below installation steps carefully. It also repairs IC flasher easily. So, if you need the Z3x EMMC tool’s latest setup, you can download it below.
Read: Download UMT iOS Tool v3.9
Key Features
- ARM7/ARM9/ARM11, CORTEX-A8, Cortex-A9 Dual cores support
- JTAG chain is supported, and TAP number selection is available
- No pin is required for connection
- Custom TCK Speed presetting selection
- TCK/Adaptive clocking selection
- Halt core
- Reset core
- Direct Read and Write memory
- control registers of the ARM core
- Program code breakpoints
- Run Halt Restart core
- 19 Pins Hardware Accelerated
- Multiple flash chips (address space) support
- One Button repair, resurrection help
- interface pinout for each supported model
Read More: MRT Dongle Crack 3.19
Download
The download process of Z3x Easy Jtag Latest Setup is pretty simple. All you have to do is click on the below link and download the setup, but I always recommend you download the setup from the official site.
File Name: Z3x Jtag 3.6.2.exe
File Size: 356MB
Type: exe
Supported OS: Windows
How to use Easy Jtag to reset user data
Reset user data using Z3x Easy Jtag is very. Just follow the below process carefully and install the right USB driver for your phone.
Read: Download Griffin Unlocker Tool
1. Download the Z3x Jtag Plus tool and extract it on your computer.
2. Run the jtagsetup.exe from there.
3. Connect the Jtag box.
4. Go to the EMMC option.
Read: UMT SPD Tool V0.8 Setup
5. Connect your device in ISP or EMMC pinout mode.
6. Tap on the detect button.
7. Now check your device is connected or not in the log box.
8. Go to the advanced option.
9. Click on Wipe User Data, or If you have an Oppo phone, then click on Reset Oppo button.
10. That’s it.
11. This is a simple way to use a Z3x EMMC tool on your computer.
Read More: Miracle Box Latest Setup
Conclusion
I share here complete information about Z3x Easy Jtag tool. I hope i clear all your doubts regarding this topic.
Thanks for visiting us. Comment below if you face any problem with it. I will try to solve your problem as soon as possible. You can check other some tutorials here to help you.
