If you own a Xiaomi Redmi Note 6 Pro and if it stuck at bootlogo and the hard reset is not working then here we provide you a step-by-step tutorial on How to Flash Redmi Note 6 Pro with Flash File easily.
Read: Download SamPro Tool v4.1.0.2 Free (Latest Version)
How to Flash Firmware on Redmi Note 6 Pro
We applied this method on Redmi Note 6 Pro to Flash firmware with official Flash tool. Before flashing, you have to follow the pre-requisite to perform flashing fix the phone.
Download Redmi Note 6 Pro Firmware ROM
EMMC Name:– Emmc file note 6 pro.zip
Flash File Name: Redmi_Note_6_Pro_V10.0.4.0.OEKMIFH
Size: 7GB
Download: EMMC File
Flash Tool: Xiaomi Flash Tool
Read: Download MDM Fix Tool V1.0.6.5 (Latest Version) Free
Pre-requisite
Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.
- First of all download all the files.
- Download the Flash file.
- Xiaomi Flash Tool
- Download & install Xiaomi USB Driver
- Follow the below guide carefully.
Read: Download SamFlash Tool V4.1 (Latest Version)
Lets Flash Stock ROM
- First, download all the files on your desktop.
- After that, extract all the files and then open the prog emmc folder.
- then copy the files from that folder and then paste the files on the extracted flash file “images” folder.
- Now install the flash tool.
- After that, open the flash tool on your computer.
- Now click on the select button from there,
- Then give the file path of the flash file on your Xiaomi flash tool.
- Then put your device into edl mode.
Read: Download Realme Network Unlock File (Without Password)
Install the Qualcomm USB Driver on your PC
- Download the Qualcomm USB driver on your PC.
- After that, extract the downloaded files.
- Now open the extracted folder.
- There you will see “Setup.exe” double click and run the setup,
- click on next -agree- next finish to installation complete.
- Then follow the below process.
Also check: Download Realme C30 RMX3581 FRP File (SPD PAC Unlock File)
Redmi Note 6 EDL Mode
- Power Off your Xioami Redmi Note 6 Pro.
- Remove the back panel of the phone.
- Then check the image and find the same EDL connection on your phone’s PCB.
- Short the EDL pins & Connect USB.
- The phone will boot into the EDL Mode.
Start Flashing
- Go to the Flash Tool.
- Click on “Refresh” button
- Then you will see a bar will be added on the log screen of the Xiaomi flash tool.
- Now click on the Flash button.
- Then you will see your flashing will be started,
- Wait for the finish.
- Then disconnect and power on your device.
- Done.
Also check: Download Redmi K70E Fastboot ROM Firmware (Flash File)
Video Tutorial:
Still confused? don’t worry watch our step-by-step video tutorial it will clear all doubts regarding unlocking the phone. Do subscribe If the process is useful for you.
Read: How to Honor 8x FRP Bypass (Latest Method) – Without PC
