Samsung SM-J260G FRP Bypass (Samsung Galaxy J2 Core FRP File) Latest 2020

If you own a Samsung SM-J260G, and after the hard reset if you stuck at google account verification screen then here we will solve your problem by unlocking FRP lock from your device, so just follow this process that helps Samsung SM-J260G FRP Bypass, there is a couple of methods to unlock FRP from your device but we share here the latest method to FRP Bypass by Samsung Galaxy J2 Core FRP File.

This phone has some strong features, the front camera of this phone is good enough to provide crisp and clear selfies and the storage of this device is sufficient enough to store a big amount of images, videos and kinds of music, Techno has a decent processor and RAM management is very good while you do multitasking with this device.

 

 

Things That you Needed to Samsung SM-J260G FRP Bypass

You can follow this method on any  Samsung SM-J260G FRP, we only share here the latest FRP file for U1 bootloader and U2, U4 Bootloader.

Warning:- This method is only for the device owner.

Caution:- We are not responsible for any damage to your Device. before you try this method backup your Full data.

First of all download all the below the file that you need to Samsung J260G.

-Download the first FRP File:- This file helps you to detect your device in Odin tool.

-Samsung Galaxy J2 Core FRP File and Tool:- It’s a new tool to remove FRP.

-Download & Install Odin USB Driver.

-Follow the below guide carefully.

 

 

 

 

Now install Samsung USB Driver to Computer:

-Open the “USB Driver” folder, there you will see a “setup.exe” file.

-Install the “Setup.exe” file by double-tapping on it.

-Then hit next -next-next -finish to install the Samsung USB driver to your computer.

-Done. now your device will easily detect on PC and you can easily do the SM-J260G FRP.

Method: Samsung SM-J260G FRP Bypass

-First, you have to download all the FRP files and tools to your computer.

-Once downloading finish, copy all the files to a new folder. (to understand easily).

-After that, extract all the downloaded files one by one using 7zip or WinRAR.

-Once done, now there you will see “3” folders. <i> FRP Bypass Files, <ii> FRP tools, <iv>USB Driver.

-Extract “FRP Tool” and “FRP File” on your PC.

-Then open the FRP tool folder.

-There you can see the “Odin” folder.

-Open the “Odin” folder.

-Then find and Run as Administrator “Odin.exe”.

-After that, click on the “AP” file tab.

-Now Click on the “AP” tab, now Give the file path of FRP file “SM-J260G FRP File”. – file on the extracted FRP files folder.

Note:- We share here U1 and U2 Bootloader version FRP file, if your device bootloader version is U1, then you try U1 version FRP file and if you have U2 then try U2 Bootloader file.

Put your device in Download Mode

-First of all, power off your device,

-After that, press and hold the “Volume UP and Volume down and Power” key until you see the “Warning” screen in your device.

-After that, press “Volume UP” to confirm the “Download Mode”.

-Now connect your device to PC.

-Then go to the “Odin Screen”.

-From there, you can see the “ADDED” message on the “Log screen” of your Odin tool.

-Now Click on the “Start” button to flash your device.

-Once flashing finishes, then disconnect your device from pc.

 

Subscribe Our Channel For More Interesting Videos Daily (On Youtube):-SUBSCRIBE

Thanks for visiting us, Comment below if you face any problem With FRP Bypass Samsung SM-J260G, we will try to solve your problem as soon as possible. you can check other some tutorials here to help you.