How to Root and Install TWRP Ergo A502 Aurum

Root and Install TWRP Ergo A502 Aurum, Good news for you guys now you can easily Root and install TWRP recovery Ergo A502 Aurum, If you want to customize your Android device, then you need to root your device first, before you root your Ergo A502 Aurum, root void your device warranty, Root and install TWRP Recovery you need to follow below all steps very carefully. To Root and Install TWRP Ergo A502 Aurum you need to download some files. All downloadable files and guide on below. This guide is only for Ergo A502 Aurum so don’t try this on any device. 

If you want to know the full power of Android Customization, then Root is the first priority to get all customization ability to get root access on your Ergo A502 Aurum, Then download the custom recovery for Ergo A502 then flashing the custom recovery on Ergo A502 Aurum. TWRP recovery is the most popular custom recovery for Android devices.

In this guide, you will know how to Root and install TWRP recovery for Ergo A502 Aurum, This is official TWRP for Ergo A502 Aurum, TWRP comes with the touchscreen supports with an encryption mode.

In this device, we need to flash TWRP recovery first to root Ergo A502 Aurum,

Before We start the procedure

Note:-  This method is successfully applied to Ergo A502 Aurum.

If you want to customize your Ergo A502 Aurum or want to flash Custom ROM on your devices then you need to root your device first, If you already root your device then you can skip the root steps and starts only from Installing TWRP recovery steps, If your Ergo A502 Aurum is unrooted, then you need to follow each and every step to Root Ergo A502 Aurum.

How to Root and Install TWRP Ergo A502 Aurum

TWRP is a custom recovery which also known as Team Win Recovery Project. TWRP build with a Touchscreen Interface which allows to users flash Custom Firmware and Android Moded customizes packages and third-party moded system, Its also allows users to backup the system which is not supported by Android stock recoveries.

I am just warned you that, By doing this you will loose your device warrenty and please read all the steps very carefully because if you don’t read all steps very carefully then you will Brick Your Device.

This is the guide we will show you how to Install latest TWRP for Ergo A502 Auram, Download the latest official Ergo A502 Auram TWRP recovery and read below guide to install TWRP recovery Ergo A502 Aurum. If you flash the custom recovery on Ergo A502 Aurum, then you can easily install custom Rom, Custom kernel, Custom Mods or any zip files read the below guide very carefully How to Root and Install TWRP Ergo A502 Aurum.

 

Advantages of Rooting Android devices

-If you root your device then you can easily access all the system files from your Ergo A502 Aurum.

-If your device has rooted then you can easily access the Root directory of your Ergo A502 Aurum.

–If your device has rooted your device performance will be increased.

-Rooting your Ergo A502 Aurum then you can modify, edit, delete, view any of your device system file inside the root directory.

–If you root your device then you can flash any Custom Recovery or you can flash Custom Roms like cyanogen mods, Linage Roms, MIUI and Flame OS even many more custom ROMs,

-You can block Ads from your Android applications such as gaming and other related applications.

-If you root your device then you can Install the Xposed framework and more Xposed modules.

Advantages Of TWRP Recoveries 

-After the Rooting your devices you can easily flash the Custom ROM on your devices.

-You can flash the “Moded Zip files” to customize your Android devices.

-Use Xposed framework very easily.

-Easy Root using TWRP recovery.

-You can take a Back up of your Android devices, in case of any modding your device and be flashing your device.

-Easy access and Restore the backup of your Devices.

-You can flash “image” files through the Custome Recovery.

-Remove all the bloatware from your device.

-To clock your kernel.

-You can clean Wipe cache and Data reset on your devices.

Unlock Bootloader Ergo A502 Aurum

-Download the “Minimal ADB & Fastboot” tool from below.

-Then extract the “Minimal ADB & Fastboot” on your PC.

-After that, power off your Ergo A502 Aurum.

-Then Press and hold  (Power On and Volume UP) key together until you see the “Boot Mode” select.

-Then there select the “Fastboot” mode.

-Then on your PC “Run The Minimal ADB & Fastboot tool” with Administrator permission.

-Then Go to the Fastboot tab.

-Then connect your Ergo A502 Aurum to PC.

-Then go back to “Minimal ADB & Fastboot”

-Then choose the manual command and unlock the bootloader.

-Then put the following command there “fastboot OEM unlock“.

-On the Ergo A502 Aurum should appear a confirmation message of the bootloader unlock. 

-Select “yes” from there.

-Restart the device and your device bootloader is unlocked.

 

 

DOWNLOAD MAGISK :– HERE

DOWNLOAD SP FLASH TOOL:- HERE

-First, download the “MTK Vision” USB Driver (Its compatible with all MT65/67XX Android devices).

-Download SP Flash tool from below.

-After that, Download the TWRP recovery for Ergo A502 Aurum.

-For this process, you need a working PC.

-Charge your Ergo A502 Aurum up to 50-60%.

-You need to unlock the Bootloader on Ergo A502 Aurum (Skip this step because of most of Mediatake phones comes with pre unlock Bootloader).

-Fully Back up your device data.

-To flash the TWRP recovery Ergo A502 Aurum, you need to install the Vcom USB driver and installed the SP Flash tool in your PC.

-You can find the “Scatter” files from the “TWRP” Zip file, that you downloaded before.

-The Last part, download the “SuperSU” and copy the files to your MicroSD card to successfully root Ergo A502 Aurum.

Flash TWRP Recovery Ergo A502 Aurum

-Download All the files first.

-After that, Copy all the downloaded files to your desktop.

-Then extract the “SP Flash Tool” to your desktop.

-After that, extract the “TWRP Recovery” and “MTK Vcom” USB Driver.

-Once all files extracting finish. then open the “SP Flash Tool” folder.

-Then find and run the “SP Flash tool.exe”.

-After the “SP Flash Tool” is open.

-Then click the “choose” button from the “Scatter” loading tab.

-Give the file path of the “MT67XX_Scatter.txt” file. (File on Extracted TWRP folder).

-Then click the “Download” button.

-After that, connect your Device to PC.

-Then your device will automatically detect on SP Flash tool. If your device does not detect on your PC so please install the USB driver and change the USB cable.

-Once flashing done.

-You will get a right mark popup on your SP flash tool.

-Disconnect your device.

Root Ergo A502 Aurum

-After that, download the “Magisk Manager” flashable zip from here.

-Then copy the “SuperSU” and the “Magisk” file to your MicroSD card.

-Then insert the memory card into your device.

-Then press and hold the (Volume UP and Power) key, until you see “TWRP” logo on your device.

-Then tap on “Install” then open the “external” memory then choose the “Magisk.zip”.

-Then “swipe left to right” to confirm install Magisk to your Phone.

-After the installation finished.

-Go back to “external_SD card ” again then choose the “SuperSU.zip” from there.

-Once installation finished.

-Then tap on “Wipe cache and dalvik”.

-Once finished, go back to the main “TWRP” home screen.

-Then go to “Reboot” tab.

-Then select “System” from there.

-Wait for power on your device fully.

-Once power on download the “Root Checker” from play store.

-Check your device “root” or not.

-Done. now you have successfully Root and Install TWRP Ergo A502 Aurum

Thanks for visiting us, Comment below if you face any problem With Root and Install TWRP Ergo A502 Aurum, we will try to solve your problem as soon as possible. you can check other some tutorial here to help you.